Gefen Pro GEF-DVI-848DL, User Manual, Page: 39 / 92

35
TELNET / RS-232 COMMANDS
#snetmask Command
The #snetmask command sets the IP network mask. Dot-decimal notation must
be used when specifying the IP network mask.
Syntax:
#snetmask param1
Parameters:
param1
Network mask
Notes:
The default net mask is set to 255.255.255.0
The matrix must be rebooted after executing this command.
Example:
#snetmask 255.255.0.0
New IP Mask set to: 255.255.0.0
#use_telnet_pass Command
The #use_telnet_pass command requires or disables login credentials.
Syntax:
#use_telnet_pass param1
Parameters:
param1
State [0 - 1]
Value Meaning
0 Disable password
1 Enable (force) password
Notes:
The default setting is disabled
Example:
#use_telnet_pass 1
Telnet password at login is set to ON