Gefen Pro GEF-DVI-848DL, User Manual, Page: 11 / 92

7
PANEL DESCRIPTIONS
Back Panel
1 110 / 220 V AC (50/60 Hz) Power Receptacle
Connect the included AC power cord from this receptacle to an available
electrical outlet.
2 Fuse Drawer
Each power receptacle houses a fuse drawer. Within each fuse drawer are two
(2) 250 V fuses. One fuse is active and the other is a spare.
3 DVI Input Ports 1-8
Connect DVI source devices to these ports.
4 Grounding Terminal
Provides a discharge path to ground in case a short circuit occurs between the
“hot” lead of the power supply and the enclosure of the Matrix. The grounding
wire should be attached from the grounding terminal to an approved ground
path.
5 IP Control Interface
Connect to this port to control the 8x8 DVI Dual Link Matrix using IP Control.
See page 16 for details.
6 IR Extender Port
Connect an IR extender cable to this port (Gefen part no. EXT-RMT-EXTIR).
7 DVI Output Ports 1-8
Connect DVI monitors to these ports.
8 RS-232 Serial Port
Connects to the RS-232 control device. The 8x8 DVI Dual Link Matrix may be
switched remotely using this port. See page 17 for more information.