Boost-N Part#:GT-APN User Manual
24
There are
Continuous
,
Connect on Demand
and
Manual
three types to select.
Continuous
connection
type means to setup the connection through PPPoE
protocol whenever this WLAN Broadband Router is
powered on.
Connect on Demand
connection type means to setup
the connection through PPPoE protocol whenever you
send the data packets out through the WAN interface;
there are a watchdog implemented to close the PPPoE
connection while there are no data sent out longer
than the idle time set.
Manual
connection type means
to setup the connection through the PPPoE protocol
by clicking the
Connect
button manually, and clicking
the
Disconnect
button manually.
Idle Time
The amount of time of inactivity before the device will
disconnect your PPTP session.
MTU Size
Fill in the mtu size of MTU Size. The default value is
1400
Request MPPE Encryption
Click the checkbox to enable request MPPE
encryption.
Request MPPC Compression
Click the checkbox to enable request MPPC
compression.
Attain DNS Automatically
Click to select getting DNS address for
DHCP
support.
Please select
Set DNS Manually
if the
DHCP
support is
selected.
Set DNS Manually
Click to select getting DNS address for
DHCP
support.
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC Address
Fill in the MAC address that is the MAC address to be
cloned
Enable uPNP
Click the checkbox to enable uPNP function.
Enable IGMP Proxy
Click the checkbox to enable IGMP proxy
Enable Ping Access on WAN
Click the checkbox to enable WAN IGMP response.
Enable Web server Access on
WAN
Click the checkbox to enable web configuration from
WAN side
Enable IPsec pass through on
VPN connection
Click the checkbox to enable IPSec packet pass
through
Enable PPTP pass through on
VPN connection
Click the checkbox to enable PPTP packet pass
through
Enable L2TP pass through on
VPN connection
Click the checkbox to enable L2TP packet pass
through
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover
the previous configuration setting.
L2tP
Use Layer 2 Tunneling Protocol (L2TP) if your ISP uses an L2TP connection. Your ISP will provide you with a
username and password.
Summary of Contents for Boost-N GT-APN
Page 1: ......
