background image

3

 

INTRODUCTION 

The Geemarc Digital Wireless Audio Listener is an audio 
amplification system specifically designed for people with 
hearing difficulties. 
The Geemarc Audio Listener can be used with all kinds of 
audio systems for interference-free listening enjoyment – 

TV set, Smartphone, DVD player, CD player, Hi-Fi system, 
iPod or other

Audio output from a TV or audio device is transmitted by the 
Charging Cradle(Base), the wireless Headset receives the 
signal and amplifies the audio sound for the listener. 
One Base can be paired with up to 4 Headsets. 
One Base can support 2 Headsets for charging. 

The listener’s comfort and long-term enjoyment has been built 
into every feature of the Geemarc Wireless Audio Listener: 

 

Lightweight wireless headset fitted with soft silicone ear buds 
for prolonged listening comfort; 

 

Rich, adjustable audio quality: 

o

  Broad audio bandwidth, High quality sound. 

o

  Adjustable EQ and balance to compensate for hearing 

loss. 

 

Listen but keep in touch with your surroundings:   

o

 Multiple Headsets can be paired with one Charging 

Cradle; 

o

 Single-touch Mute function switches the Audio Listener 

into a conversation assistant enabling you to talk with 
and listen to the people around you with the Headset 
on, taking advantage of its built-in audio amplifier to 
hear everything better. 

INTRODUCTION 

Summary of Contents for CL7370

























Reviews: