13
3. Adjust the Volume to the desired
sound level (see figure (4) at
right), Press '
+
' button to increase
volume and '
-
'button to decrease
volume. Headset beeps when
volume reaches maximum or
minimum. then fit the Earbuds in
your ears.
NOTE:
Make sure the volume on your Audio Source (TV set
or other audio device) is turned up to at least half of its full
volume to get good sound quality in your Earbuds.
NOTE:
1. The Headset will turn off automatically if there is no audio signal
from the audio source (TV set, etc.) or a too weak signal within
about
15
minutes
, if you want to resume headset in this case,
you can short press the MIC Button to Power on the headset.
2. Auto Power OFF Headset simply by replacing the Headset in its
Charging Cradle.
3. Auto Power ON Headset simply by taking the Headset from its
Charging Cradle. - This is only available when a Power on headset
is replaced into Charging Cradle.
4. If you place a power off headset into its charging cradle, the
headset can not be Powered on automatically when you take it
again. In this case, just short press MIC button to Power on
headset.
OPERATION
