Seite 7
Step 5:
Insert the heating head onto the pipe and screw in the screws again.
Step 6:
Finally, carefully lay the patio heater on its side and loosen the cable clamp on the
base, then screw the clamp back in with the cable secured underneath.
Service:
Make sure that the two on / off switches are set to "o". Connect the patio heater to a grounded socket.
The heating circuits are switched on with the switches on the heater. (I) or (II) for 1,000 W and
(I together with II) for 2,000 W. Both switches to 0 switch off the patio heater.
Although the unit is splash-proof, it should be placed in a dry area when it rains.
Always unplug the appliance from the main power socket if you do not use the heater.
10
0
11
12
13