GEDA Battery Ladder Lift, Assembly And Instruction Manual

Page: 12 / 124

General information
Assembly and instruction manual 12 / 124 BL164 GB Edition 07/2017
1.7 Intended use
The GEDA BatteryLadderLIFT is an inclined lift with a platform not for
walking access and designed exclusively for transporting material.
It is used temporarily at construction sites and for relocation operations
and is always operated via dead man’s control by instructed operators.
The winch is directly integrated in the device, which runs on the special
ladder. The load suspension system/ element consists of webbing.
The device is controlled by remote wireless control or smartphone
application via Wi-Fi connection.
The GEDA BatteryLadderLIFT moves on a ladder specifically provided
for this purpose. This ladder can also be used as step-ladder.
In addition, the GEDA BatteryLadderLIFT can be used as straight load
winch when suspended.
The base unit GEDA BatteryLadderLIFT may only be operated with
the battery type “ GEDA GL247 ”.
The battery may be charged only with the charger type “ L2530 Charger
Li-Ion ”.
Observe and comply with the instructions in Chapter 3 “Technical Data”.
Any other use or any use (e.g. transportation of persons) going beyond
this is not considered intended use.
The operating company/user of the device is solely liable for any
damage resulting from such action. This applies equally to any
unauthorised changes to the device.
Intended use includes
• compliance with the assembly, operation and maintenance
provisions (assembly and instruction manual) provided by the
manufacturer.
• consideration of foreseeable misconduct of other persons.
• observation of the corresponding national regulations.

The GEDA BatteryLadderLIFT is suitable for temporary use.
Any other locations or intended uses require written approval from
the manufacturer.