GEDA Battery Ladder Lift, Assembly And Instruction Manual

Page: 108 / 124

Malfunctions – Diagnosis – Repair
Assembly and instruction manual 108 / 124 BL164 GB Edition 07/2017
10.1.5 Coding the wireless hand-held transmitter
Any base unit is set to a wireless hand-held transmitter (coded).
When supplying a replacement hand-held transmitter or if the hand-held
transmitter of a different device was brought along to the operating site,
the hand-held transmitter can be set to the base unit.

Switch off the base unit with the ON/OFF switch.

Disassemble the cover from the base unit and the switch box cover.

Open the hand-held transmitter.

Switch the coding switch of the hand-held transmitter in the same
sequence as the coding switches on the motor control are set.
Motor control coding Hand-held transmitter coding
Photo example: Coding switch No. 5 is activated.
Coding switches No. 1, 2, 3, 4, 6, 7, 8 are deactivated.

The coding switches of the transmitters must be switched in the
same sequence as those of the receiver.

When returning the hand-held transmitter to the original device,
it must be set again to the original coding.