20
Low level configuration
Key 1
Key 2
Key 3
Key 4
Key 5
Key 6
1 pump
Pump 1
---
---
---
---
light
2 pumps
Pump 1
Pump 2
---
---
---
light
2 pumps + blower
Pump 1
Pump 2
Blower
---
---
light
3 pumps
Pump 1
Pump 2
Pump 3
---
---
light
3 pumps + blower
Pump 1
Pump 2
Pump 3
Blower
---
light
4 pumps
Pump 1
Pump 2
Pump 3
Pump 4
---
light
4 pumps + blower
Pump 1
Pump 2
Pump 3
Pump 4
Blower
light
5 pumps
Pump 1
Pump 2
Pump 3
Pump 4
Pump 5
light
5 pumps + blower
Pump 1
Pump 2
Pump 3
Pump 4
Pump 5 + blower
light
Electrical configuration
Please do not make changes in this section unless you
are a qualified electrician.
In this section you can change the low-level
configuration, as well as modify the number of phases
and the entry current
use the up/Down Keys to move to the selection you
want to modify use Key 2 to select, and the up/Down
Keys to move through the selections Press Key 2 again to
confirm Please see the techbook for your spa system for
details on low-level settings
Once you have changed the number of phases in the
menu you will be unable to use the up/Down keys to
return to the
low-level configuration menu Please go
back and access the menu again
Note that with a special low level configuration, it is possible that the blower has been set to always remain on key 5.
the table below shows the key assignation based on the accessories selected in your pack's low level configuration
Please refer to the pack manual for specifications to identify the low level configuration for your spa
Please note that if there are two spa packs in the system (ie a Swim Spa installation), the master unit’s chosen
configuration must support a slave unit If, after re-booting, the chosen configuration does not support SwimSpa
installations, the ink800 will return (after about 45 seconds) to this configuration menu and prompt the user to select
a configuration number again
Keypad functions
