13
Water care
the Water Care section will help you set up your ideal
filtration and heating settings Choose from
Away from
Home
,
Beginner
,
Energy Savings
,
Super Energy Savings
,
and
Weekender
, depending on your need
use key 2 to choose your setting A green checkmark will
appear on the selected icon to confirm
In Economy mode, the set point will be reduced
by 20°F*, which means that the heating system will not
be engaged unless the temperature falls to 20°F below
the spa's set temperature
the filtration schedule shown on the screen will apply
to the main filtration pump, most likely pump 1 If your
spa uses a circulation pump configured to run 24 hours,
the screen will show you the purge setting instead
of filtration the purges are pre-programmed for a fixed
number of minutes, therefore the duration will be
set to N/A on the screen, and only the start time can
be modified
*Default pack value
Keypad functions
Water care modes
Away:
In this mode the spa will always be in economy;
the set point will be reduced by 20° F*
Beginner:
the spa will never be in economy mode and will be
filtering according to the pack's low level configuration
Energy Savings:
the spa will be in economy mode during the peak hours
of the day and resume normal mode on the weekend*
Super Energy Savings:
the spa will always be in economy mode during peak
hours, every day of the week*
Weekender:
the spa will be in economy mode from Monday
to Friday, and will run normally on the weekend*
*Filtration will be reduced when the economy mode is active
