9. RETURN FADER
Adjusts the level of the mixed signals sent from the AUX RETURN connector into the ST (STEREO) L and R
buses. You may use this function to control the amount of mixed signals on peripheral such as an external
effects unit being sent to the mixing console.
10. ST (STEREO) L & R FADERS
Adjust the signal level to the STEREO OUT (ST OUT) - L (ODD) and R (EVEN) output connectors.
11. P48V SWITCH / +48V LED
This switch toggles phantom power ON and OFF. If you set the switch ON, the mixing console supplies DC
+48V power to all channels (Channels 1 to 8) that provide MIC (XLR female) input connectors. Set this
switch ON (pressed in, +48V amber LED lights up) when using one or more condenser microphones.
WARNING:
Be sure to leave this switch OFF (switch not pressed in) when you are
not using phantom power. Humming or damage may result if you connect to an
unbalanced device or to an ungrounded transformer while this switch is ON (pressed
in, +48V amber LED lights up). But note that the switch may be left ON without
problem when connecting to balanced dynamic microphones. To avoid damage to
speakers, be sure to turn OFF amplifiers (or powered speakers) before turning this
switch ON or OFF.
12. ST/PFL SWITCH
With the ST/PFL switch unpressed, the overall ST (STEREO) output is sent to the PHONES connector, and
LEVEL METER. With the ST/PFL switch pressed in, only the overall summed PFL output is sent to the
PHONES connector, and LEVEL METER.
13. PHONES LEVEL CONTROL
The PHONES LEVEL knob controls the level of the signals output to the PHONES connector.
14. LEVEL METER
This 5-segment LED METER shows the level of the signals selected by the selection switches described in
[12] above. The “0” point corresponds to the standard output level. The indicator lights up red when the
output hits the clipping level.
15. POWER INDICATOR
This indicator lights up when the mixing console's power is ON.
16. ST GRAPHIC EQUALIZER
This 5-band equalizer adjusts the sound of the signal send to the ST OUT connectors. The equalizer cuts or
boosts each band (70Hz, 200Hz, 1kHz, 5kHz, and 12kHz) over a range of ±12dB.
17. PHONES CONNECTOR
Connector for headphones. This is a balanced stereo phone-type (¼” TRS) output connector.
______________________________________________________________________________________
4
4
© GECKO MUSIC GROUP. All Rights Reserved.
