Gecko Aeware3 in.k450 User Instructions And Functions Download Page 7

13

12

in.k450

in.k450

Pump 2 key

Press 

Pump 2

 key to turn Pump 

2 on. Press a second time to 

turn pump off. 

A built-in timer automatically 

turns pump off after a  20 

minute period, unless pump 

has been manually deactivated 

first.

Light key 

Press 

Light

 key to turn light on 

Subsequent presses turn lights 

on and off while changing 

colors.

A built-in timer automatically 

turns light off after a period 

of 2 hours unless it has been 

manually deactivated first.

Up/Down keys

Use 

Up

 or 

Down

 key to set 

desired water temperature. 

The temperature setting will 

be displayed for 5 seconds to 

confirm your new selection.

The "Set Point" icon indicates 

that the display shows the 

desired temperature, NOT the 

current water temperature!

Pump 3 Key (Blower)  

First press

Pump 3 ON, Blower OFF

Second press:

Pump 3 ON, Blower ON

Third press:

Pump 3 OFF, Blower ON

Fourth press:

Pump 3 OFF, Blower OFF

A built-in timer automatically 

turns blower off after a 20 

minute period, unless blower 

has been manually deactivated 

first.

functions and user instructions

functions and user instructions

On/Off key

Depending on the spa manu-

facturer, this key may have 

different functions: On/Off, 

Standby mode or quick enable 

of the Economy mode.

On/Off Mode

By default, the system is always 

on. Press and hold 

On/Off

 key 

for 5 sec. (or Press and hold 

Pump 1

 key for 5 sec.) to shut the 

system down for 30 minutes. 
The display will toggle between 

the “OFF” message and water 

temperature. Press On/Off key 

to restart the system before the 

expiration of the 30 minutes delay. 

Pump 1 key 

Press 

Pump 1

 key to turn Pump 

1 on at low speed. Press a 

second time to turn pump to 

high speed (with a dual-speed 

pump). A third time turns  

pump off.

A built-in timer automatically 

turns pumps and blower off 

after a period of 20 minutes, 

unless pump has been 

manually deactivated first.

Summary of Contents for Aeware3 in.k450






















Reviews: