Gecko Aeware3 in.k450 User Instructions And Functions Download Page 2

3

2

in.ye

in.ye

 

 WARNINGS:

 

Before installing or connecting the unit, please read the following.

* FOR UNITS FOR USE IN OTHER THAN SINGLE-FAMILY DWELLINGS, A CLEARLY LABELED 

EMERGENCY SWITCH SHALL BE PROVIDED AS PART OF THE INSTALLATION. THE SWITCH 

SHALL BE READILY ACCESSIBLE TO THE OCCUPANTS AND SHALL BE INSTALLED AT LEAST 

5 FEET (1.52 M) AWAY, ADJACENT TO, AND WITHIN SIGHT OF THE UNIT.

* ANY DAMAGED CABLE MUST BE IMMEDIATELY REPLACED. 

* TURN POWER OFF BEFORE SERVICING OR MODIFYING ANY CABLE CONNECTIONS IN 

THIS UNIT.

* TO PREVENT ELECTRIC SHOCK HAZARD AND/OR WATER DAMAGE TO THIS CONTROL, 

ALL UNUSED RECEPTACLES MUST HAVE A DUMMY PLUG. 

* THIS CONTROLLER MUST NOT BE INSTALLED IN PROXIMITY OF HIGHLY FLAMMABLE 

MATERIALS. 

* LOW VOLTAGE OR IMPROPER WIRING MAY CAUSE DAMAGE TO THIS CONTROL 

SYSTEM. READ AND FOLLOW ALL WIRING INSTRUCTIONS WHEN CONNECTING TO 

POWER SUPPLY.

 

* THIS PACK CONTAINS NO SERVICEABLE PARTS. CONTACT AN AUTHORIZED SERVICE 

CENTER FOR SERVICE.

* ALL CONNECTIONS MUST BE MADE BY A QUALIFIED ELECTRICIAN IN ACCORDANCE 

WITH THE NATIONAL ELECTRICAL CODE AND ANY STATE, PROVINCE OR LOCAL 

ELECTRICAL CODE IN EFFECT AT THE TIME OF THE INSTALLATION. 

warnings

overview

in.ye

user instructions and functions

Summary of Contents for Aeware3 in.k450






















Reviews: