CERTIFICATE OF GUARANTEE
TO BE COMPILED AND SENT IN THE EVENT OF A FAULT
INSTRUMENT
:
T-Touch
Touch Screen Thermostat
Serial number:_________________________________________
RETAILER
Stamp: Purchase date:
_______/________/________
USER
Surname and name_____________________________________
Address
_____________________________________nr_______
Postal code:_______________Town________________________
Telephone____________________________________________
The manufacturer reserves the right to make any aesthetic or functional
modifications without any prior notice and at any time.
dis. 1834043b cod. 2.710.2392
TEMPERATURE
DETECTED
SET
TEMPERATURE
ON/OFF
SUMMER/WINTER
PROGRAMME
TEMPERATUREDECREASED SET
TEMPERATURE AND THERMAL
DIFFERENTIAL
HEATING/AIR-
CONDITIONING
SYSTEM
FUNCTIONING
BATTERY
DISCHARGED
Pic.21
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
-Power source:
2 x 1.5V AA alkaline batteries.
-Autonomy (Stand-by):
more than 2 years.
-
Temperature range
adjustment
:
SUMMER programme
from 15°C to 35°C in the DAY mode “ ”
from 10°C to 30°C in the NIGHT mode “
”.
WINTER programme
from 5°C to 30°C in the DAY mode “ ”
from 2°C to 25°C in the NIGHT mode “
”.
-Automatic control of the battery discharge with two intervention thresholds.
-Adjustment steps:
0.2°C in the WINTER programme ( ), 0.5°C in the SUMMER programme ( ).
-Adjustable thermal differential: from 0.2°C to 2°C (intervention interval from +0.1°C to +1°C )
-Possibility of programming any temperature included in the adjustment fields at each hour of the day, every day of the week.
-Contact capacity:
230V AC - 5A (resistive load).
-Installation:
fitted into a three-module pattress box.
-Colours available:
white, anthracite grey and silver.
-Weight:
110gr including the batteries.
GECA
Srl via E.Fermi n°98 25064
Gussago (BS) Italy
Tel. +39 030 3730218 - +39 030 3730236
Fax +39 030 3730228
E-mail:[email protected] - http://www.cavagnaindustrie.com
Tecnocontrol
Srl via Miglioli n°47 20090
Segrate (MI) Italy
Tel. +39 02 26922890 Fax +39 02 2133734
E-mail:[email protected]
http://www.cavagnaindustrie.com
- The programming interface is completely visualized on the front display screen
and it is therefore possible to utilize the thermostat whilst it is fitted
into its thermostat’s housing in the wall.
If the thermostat needs to be programmed extract it from its housing and then
once reinserted
update the status of the relay by touching the display to
establish the temperature detected in that environment.
- The pressure used on the display during use and whilst programming must
be light and localized to the zone foreseen for that specific function.
CORRECT UTILISATION AND MAINTENANCE
CORRECT UTILISATION AND MAINTENANCE
CORRECT UTILISATION AND MAINTENANCE
CORRECT UTILISATION AND MAINTENANCE
CORRECT UTILISATION AND MAINTENANCE
If there is difficulty in touching it is possible to utilize a slender and non-
metallic instrument. If a palm pen is not available, utilize the blunt end of a
pencil, a plastic cap of a pen, a toothpick or a cotton bud.
- The cleaning of the display
must be carried out using a soft and dry cloth
without detergents or cleaning liquids/powders and using light pressure
on the display and possibly with the thermostat in BLOCK mode.
DAY & NIGHT
MODE
TEMPERATURE
INCREASED SET
TEMPERATURE AND
THERMAL DIFFERENTIAL
