Troubleshooting
Troubleshooting
The table below explains what you need to do in the event of a fault:
• Carry out the steps one after the other until the device is no longer demonstrating any faults
or is working as normal again.
• Be sure to follow the steps in order.
Step
Description of problem
Fault clearance
1
The shower toilet is demonstrating a
fault or is not working as normal.
▶ Switch off the device. → See "Switching
off the device", page 16.
▶ Wait 30 seconds.
▶ Switch on the device. → See "Switching
on the device", page 15.
2
Step 1 has been carried out.
The shower toilet continues to
demonstrate a fault or still does not
work as normal.
▶ Test the status LED on the lateral control
panel. → See "Status LED on the lateral
control panel", page 14.
3
Steps 1 and 2 have been carried
out.
The shower toilet continues to
demonstrate a fault or still does not
work as normal.
▶ Check the problem descriptions in the
faults table and carry out the relevant fault
clearance as required. → See "The
shower toilet is without function",
page 39.
▶ Check the problem descriptions in the
faults table and carry out the relevant fault
clearance as required. → See "Other
functional errors", page 40.
4
Steps 1 to 3 have been carried out.
The shower toilet continues to
demonstrate a fault or still does not
work as normal.
▶ Contact customer service.
38
63050395945953803 © 05-2019
966.983.00.0(04)
Summary of Contents for AQUACLEAN MERA CLASSIC
Page 1: ...GEBERIT AQUACLEAN MERA CLASSIC USER MANUAL...
Page 2: ......
