Descaling the device
Information on descaling:
• During the descaling procedure, you can
continue to use the device without the
shower toilet functions.
• The descaling procedure lasts up to
60 minutes. During this time, the LED
lights up orange and you can see the
descaling status on the display. Once the
orange LED switches off, the spray
functionality is once again ready for
operation.
ATTENTION
Aggressive descaling agents
Inappropriate descaling agents can
damage the device.
▶
Only use Geberit AquaClean descaling
agent for descaling.
The descaling procedure should not
be cancelled after filling the
descaling agent because it would
otherwise be flushed away unused.
The display shows
[Device is flushing…].
Prerequisite
–
The LED on the control panel flashes
blue-red.
–
At the push of a button, the display
shows [Descale device now] or
[Descale device now, device blocked] on
the rear side of the remote control.
1
Open the design cover.
2
Remove the plug.
3
Launch the [Care and maintenance]
main menu using the buttons on the
rear side of the remote control.
Care and maintenance
4
Use the <down> arrow key to select
the [Descale device now?] menu
item.
Descale device now?
no
yes
63050395945953803 © 05-2019
966.983.00.0(04)
35
Summary of Contents for AQUACLEAN MERA CLASSIC
Page 1: ...GEBERIT AQUACLEAN MERA CLASSIC USER MANUAL...
Page 2: ......
