Geberit 115.817.11.5, Maintenance Manual

Page: 10 / 24

EN
10
D64372-001 © 12-2013
966.444.00.0 (00)
Setting the flush time manually
1
2
3
For mains-operated urinal flush control:
disconnect the plug connection between
the control and the power supply unit for at
least 20 seconds and then reconnect it.
For battery-operated urinal flush control:
disconnect the plug connection between
the control and the battery for at least
20 seconds and then reconnect it.
4
Within five seconds hold your hand around
5 cm away from and in front of the control.
The new flush time lasts as long as you keep
your hand in front of the control, up to a
maximum of 15 seconds.
Result
A flush sequence is actuated. The flush time that
has just been set is confirmed by flashing. The
number of flashes corresponds to the length of the
flush time in seconds.
90º 90º
2 mm
2
1
3
2
1
00:00:20
3
1
2
00:00:20
3
5 5