3
Installing the Power Cord
□
Untie power cord located inside drawer.
□
Gently pull cord plug through grommet.
Removing the Drawers
□
Fully extend the empty drawer.
□
Push up the one release lever while pulling down on the other release lever.
□
Pull the drawer outward until it is released from the drawer slide.
Re-inserting the Drawers
□
Extend the drawer slides.
□
Insert the brackets on each side of the drawer into the slots in the slides, being careful that they are properly positioned.
□
Once properly inserted, completely close the drawer to set the slides in their proper positions.
Caster Maintenance
Grease the casters annually using high-quality bearing grease.
Installation
Operation
Maintenance
GEARWRENCH® tool storage carts are warranted for 3 years from the date of purchase to be free of defects in material and workmanship.
Apex warrants to each original Customer of Products sold by Apex that such Products are, at the time of delivery to the Customer, free of
material and workmanship defects, provided that no warranty is made with respect to:
(a) any Product which has been modified, disassembled and/or reassembled or altered in any way or improperly installed;
(b) any Product which has, in Apex’s judgment, been subject to negligence, misuse, abuse, accident, improper storage or damage during
shipment;
(c) any Product which has not been operated and maintained in accordance with normal practice and in conformity with recommendations
and published specifications of Apex; and
(d) any Products which have been serviced or repaired by anyone other than an Authorized Repair Center of Apex or modified by anyone other
than Apex. Normal wear and tear is also excluded.
These warranties set forth herein are the sole warranties applicable to Products and is in lieu of all other warranties, whether express,
implied or statutory. The implied warranties of merchantability and fitness for a particular purpose are specifically excluded.
Remedies: Customer’s sole and exclusive remedy for breach of this Warranty is, at the option of Apex, repair or replacement of the defective
product.
The Apex Tool Group is not responsible for personal injury or damage resulting from improper tool usage, product modification, abuse or
usage beyond expected product life.
GEARWRENCH® Customer Service (USA)
Apex Tool Group
(800) 688-8949
GEARWRENCH® is a registered trademark of Apex Brands, Inc., a Division of Apex Tool Group, LLC
ATG-6611
Warranty
Drawer Maintenance
Lubricate the slides semi-annually with high-quality bearing grease.
□
Push up the one release lever while pulling down on the other release lever.
□
Pull the drawer outward until it is released from the drawer slide.
