SPARE PARTS
Page 14
Before replacing the blades, turn the tractor engine off, pull
the parking brake, disengage the power take off, raise the
tiller using the tractor lift, and install supports to prevent
accidental dropping of the machine.
picture 10
picture 11
HOW TO ORDER SPARE PARTS
For spare parts requests please refer to our spare parts catalogue.
The spare parts can be ordered from the dealer or service center. The following data must
always be specified:
e
Equipment model and width.
e
Part number of the requested component. If the code number is missing, indicate the
reference number in which it is shown and the relevant reference.
e
Description of the part and requested quantity.
e
Requested type of transport. Should this information not be provided, the dealer or
service center shall not be responsible for delays caused by circumstances beyond
their control. The addressee shall be responsible for any transport charges.
Pay special attention to the bolts A on the blades (picture 10): the screw head must be placed
on the blade side, with the washer and the nut on the flange side, so that the bolts cannot
loosen while the equipment is being used.
When several blades must be replaced, replace one blade at a time, so that the initial helical
layout is maintained (picture 11).
