Setup and Operation (Iss. 01) • 12
DIP Switch Configuration
The MUX-9258-A provides a block of five DIP switches located on the front
panel. (
Figure 6
) These switches are used to configure the unit for various
modes of operation.
The following conventions are used in this section:
Figure 6
DIP Switch Location on the MUX-9258-A
A2
Green
When lit green, this LED indicates an AES/EBU signal is
present on AES input 2.
Off
When unlit, this LED indicates no AES/EBU signal present on
AES input 2.
A1
Green
When lit green, this LED indicates an AES/EBU signal is
present on AES input 1.
Off
When unlit, this LED indicates no AES/EBU signal present on
AES input 1.
SDI
Green
When lit green, this LED indicates the MUX-9258-A is locked to
a valid SDI signal.
Red
When lit red, this LED indicates the MUX-9258-A is not locked
to a valid SDI signal.
Set the DIP switch in the ON position
Set the DIP Switch in the OFF position
Table 1 Status LED Descriptions
LED
Color
Function
DIP SWITCHES
ON
