background image

 1

MUX-9258-A User Manual

Ross Part Number: 

9258ADR-004-01

Release Date: June 24, 2013.

The information contained in this manual is subject to change without notice or 
obligation.

Copyright

© 2013 Ross Video Limited

. All rights reserved.

This work is proprietary and confidential to Ross Video Limited, its subsidiaries 
and its other affiliated corporations and may not be copied, distributed, sold or 
otherwise used or relied upon without the express written permission of Ross 
Video Limited. Reproduction or reverse engineering of copyrighted software is 
prohibited.

Patents

This product is protected by the following US Patents: 4,205,346; 5,115,314; 
5,280,346; 5,561,404; 7,034,886; 7,508,455; 7,602,446; 7,834,886; 7,914,332. 
This product is protected by the following Canadian Patents: 2039277; 
1237518; 1127289. Other patents pending.

Notice

The material in this manual is furnished for informational use only. It is subject 
to change without notice and should not be construed as commitment by Ross 
Video Limited. Ross Video Limited assumes no responsibility or liability for 
errors or inaccuracies that may appear in this manual.

Trademarks

 is a registered trademark of Ross Video Limited.

 is a trademark of Ross Video Limited.

Ross, ROSS, ROSS®, and MLE are registered trademarks of Ross 
Video Limited.

VELCRO® is a registered trademark of Velcro Industries B.V.

All other product names and any registered and unregistered 
trademarks mentioned in this manual are used for identification 
purposes only and remain the exclusive property of their respective 
owners.

Summary of Contents for MUX-9258-A





















Reviews: