49-60769
11
3.
Remove the hinge cover. Carefully pull the wires
free of the clips. Disconnect the wire.
4.
Remove the top door cap by inserting a flat head
screw driver into the gap between the door cap
and door case. Apply pressure to pop the door
cap out.
5.
Unscrew the top hinge from the cabinet while
holding the door.
6.
Lift the door straight off of the bottom hinge. Set
the door aside.
7.
Unscrew and remove the bottom hinge from the
cabinet.
INST
ALLA
TION INSTRUCTIONS
Installation Instructions
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Tighten all hinge screws but avoid over-tightening
to prevent stripping.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
losing them.
• Provide a non-scratching work surface for the
doors.
CAUTION
Lifting Hazard
The Fresh Food and Freezer doors are heavy. Use
both hands to secure the doors before lifting.
IMPORTANT:
Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from
the right side to the left side—if you ever want to
change the hinges back to the right side, follow these
same instructions and reverse all references to left
and right.
IMPORTANT NOTES
REVERSING THE DOOR SWING
Phillips screwdriver
Flat head screwdriver
TOOLS REQUIRED
Masking tape
BEFORE YOU START
1. Unplug the refrigerator from its electrical
outlet.
2.
Empty all door shelves, including the dairy
compartment.
IMPORTANT:
Do not let door drop to the floor. To
do so could damage the door stop.
1.
Unscrew 4 screws on top of front case.
2.
Remove top front case cover and cover insert. The
cover insert slides out toward the bottom of the
cover.
Pliers
Screws
Cover Insert
Pull
Down
Front
Case
Cover
Top Door Cap
Hinge Cover
Clips
Hinge
Screws
Hinge
Screws
Bottom Hinge
