manualshive.com logo in svg

GEA Lagoon Agitator, Instruction Manual

Share
Download
GEA Lagoon Agitator Instruction Manual Download Page 9

Preface

GEA Farm Technologies Canada Inc. / Division GEA Houle - general equipment warranty

2010-9015-017
04-2015

9 / 64

● Freight and shipping associated with repair or replacement of equipment

under this limited warranty, as well as all costs relating to removal or
replacement of any equipment that is welded or affixed permanently to the
ground or a building (including, without limitation, labor costs, and costs
related to concrete or excavation);

● Claims arising from repairs or replacements made by the Purchaser without

the prior written consent of the Company. The Purchaser shall not remove
or alter any safety device, guard, or warning sign.

If the Purchaser fails to comply with any of its obligations referred to in this
paragraph, the Purchaser agrees to save the Company and the Dealer
harmless in respect of any liability or obligation incurred by the Company or the
Dealer resulting from such failure of the Purchaser.

Summary of Contents for Lagoon Agitator

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands