GEA Lagoon Agitator Instruction Manual Download Page 42 | Manualshive

Page: 42 / 64

background image

Operating

Moving the Lagoon Agitator

2010-9015-017
04-2015

8.6

Moving the Lagoon Agitator

Caution!

The hitch, tires, wheels, hubs and axles of the pump are designed for
agricultural use only. They are not approved to be towed at any speed
above 25 mph (40 km/h).

Caution!

The equipment has no braking system nor signal lights. It is designed
to be towed strictly on the field by a farm tractor.

If the equipment needs to be towed on public road, the owner must adapt the
equipment in accordance with local towing safety regulations.

For long distance transportation, use a truck or truck and trailer approved for
public roads.

8.6.1

Basic preparation steps before moving the agitator

● Make sure the undercarriage

cylinder(s) is/are in locked position
(1).

● Disconnect the PTO (2) and install it

on the pump frame.

● Retract the stabilizing leg (if

applicable).

● Install the jack on transportation

support (3).

● Retract the telescopic legs if the

multipurpose undercarriage is used.

3

2

1

«
...
40
41
42
43
44
...
»

Summary of Contents for Lagoon Agitator

































































Reviews:

No comments

Related manuals for Lagoon Agitator

Brand: Raymarine Pages: 464

Brand: 3M Pages: 8

Brand: ZOLL Pages: 3

Brand: Landoll Pages: 34

Sonopuls HD 4050

Brand: BANDELIN Pages: 48

Brand: Datavideo Pages: 48

Brand: Datavideo Pages: 34

Brand: Datavideo Pages: 3

Brand: Datavideo Pages: 34

Brand: Datavideo Pages: 8

Brand: Datavideo Pages: 10

Brand: Harken Pages: 4

Brand: Harken Pages: 2

TERRA FORCE BOOM

Brand: Hardi Pages: 40

Brand: Harken Pages: 4

QuickSlide HemaPRO

Brand: Hardy Diagnostics Pages: 2

Brand: Hardt Pages: 2

Brand: Fenton Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands