2
D
GB
F
E
96188-09.2013-DGbFEI
1
Safety
4
1.1 Identification of safety instructions
1.2 Qualifications required of personnel
1.3 General safety instructions
1.4 Intended use
2
Product description
6
2.1 Short description
2.2 Name plate
2.3 Type key
3
Areas of application
8
3.1 Refrigerants
3.2 Oil charge
3.3 Limits of application
4
Compressor assembly
10
4.1 Setting up
4.2 Pipe connections
4.3 Pipes
4.4 Laying suction and pressure lines
4.5 Operating the shut-off valves
4.6 Operating mode of the lockable service connections
5
Electrical connection
13
5.1 Information for contactor and motor contactor selection
5.2 Connection of the driving motor
5.3 Circuit diagram for direct start
230 V
∆
/ 400 V Y
5.4 Start unloader
5.5 Electronic trigger unit MP 10
5.6 Connection of the electronic trigger unit MP 10
5.7 Functional test of the electronic trigger unit MP 10
6
Commissioning
18
6.1 Preparations for start-up
6.2 Pressure strength test
6.3 Leak test
6.4 Evacuation
6.5 Refrigerant charge
6.6 Start-up
6.7 Avoiding slugging
6.8 Connection of oil level regulator
7
Maintenance
20
7.1 Preparation
7.2 Work to be carried out
7.3 Spare parts recommendation
7.4 Accessories
7.5 Extract from the lubricants table
7.6 Decommissioning
8
Technical data
22
9
Dimensions and connections
23
10 Declaration of conformity and installation
24
11 Service
25
About these instructions
Read these instructions before assembly and before using the compressor. This will avoid misunder
-
standings
and prevent damage. Improper assembly and use of the compressor can result in serious
or fatal injury.
Observe the safety instructions contained in these instructions.
These instructions must be passed onto the end customer along with the unit in which the compres
-
sor is installed.
GEA Bock GmbH
72636 Frickenhausen
GEA Bock GmbH
Benzstraße 7
72636 Frickenhausen
Germany
Tel49 7022 9454 0
Fax
+49 7022 9454 137
[email protected]
www.bock.de
Manufacturer
Contact