Use This Problem Solver
PROBLEM
CAUSE AND REMEDY
AIR
.
cord not
in, fuse
or circuit breaker
DOES
OPERATE
* Unit
Switch behind room cabinet is set at OFF.
is waiting 3 minutes for pressure to
across the compressor.
restrict
“DOES
COOL
OR HEAT AS
Thermostat Control may not be
high enough.
control a lower higher
SHOULD”
number. Highest setting
provide
●
Air
dirty,
be cl-cd at least every 30 days. See instructions
page 5.
●
Room may have been very hot or very cold when air conditioner was
turned on.
time for it to cool down or warm up.
* Condition air may be escaping through open furnace
registers and cold air
returns.
●
Ventilation Control maybe set at OPEN position,
air to
the room.
●
Position of the louvers will
temperature. Seepage 3.
“BURNING” ODOR
●
accumulating on
of heating element
transportation or storage
AT
OF
can cause “burning”
at beginning
operation. This odor
HEATING
dissipate.
OPERATION
This is normal.
●
Switch is set at
ONLY or Fan
Switch behind room cabinet is
at
This is
Otherwise,
on and off with the compressor or resistance heater.
DISCHARGED AIR
●
louvers down
and keep them down until condensation disappears.
CONDENSES ON
WINDOWS OR
WALLS
If you need more help.. call, toll free:
GE Answer Center”
consumer information service
6
