NOTES
3/4” Overlay Panels:
Order trim kit #ZTk42SSH
for 3/4" thick custom panels ordered from
your cabinet maker. The decorative panels
slide into the trim.
The overlay panel must be secured to a
1/4"-thick backer panel which slides into
the trim. A spacer panel 0.10" thick must
be placed between the overlay and backer
panels.
Center each panel over the other. Assemble
the panels with glue and screws. Screws must
be countersunk into the backer panel.
NOTE: Left-to-right offset is not always equal
to top-to-bottom offset.
Maximum total panel weight:
• Fresh food door panel – 75 lbs.
• Freezer drawer panel – 53 lbs.
• Grille panel – 18 lbs
Door Handles:
The supplied handles can be adjusted to
accommodate both framed or overlay panels.
Custom handles of your choice, supplied by
your cabinet maker, can also be installed.
ZkHPSS1: Professional Tubular Stainless Steel
Handle designed to fit 3/4" overlay panels.
ZkHSS2: European tubular stainless steel
handle designed to fit 3/4" overlay panels.
Kits include one handle. Order 2 kits for side-
by-side refrigerators from your Monogram
suppplier.
Trimmed refrigerators are designed to be
customized with decorative panels. Field-
installed custom door and grille panels are
required.
1/4” Framed Panels:
Order trim kit #ZTk42SSH
for 1/4" thick custom panels ordered from
your cabinet maker. The decorative panels
slide into the trim.
Maximum total panel weight:
• Fresh food door panel – 75 lbs.
• Freezer drawer panel – 53 lbs.
• Grille panel – 18 lbs
STANDARD INSTALLATION
PANEL ASSEMBLY CROSS SECTION
Door
1/4" Backer Panel
.10" Spacer Panel
Supplied Handles
Trim
3/4" Overlay Panel
3/4" OVERLAY PANEL DIMENSIONS
1/4" FRAMED PANEL DIMENSIONS
Door
1/4" Framed Panel
Supplied Handles
Trim
PANEL ASSEMBLY CROSS SECTION
Grille Panel
Freezer
Panel
Dispenser
Cutout
Fresh
Food
Panel
A
B
C
F
G
D
E
Grille Panel
Freezer
Panel
Dispenser
Cutout
Fresh
Food
Panel
A
B
C
F
G
D
E
PANEL DIMENSIONS
PANEL DIMENSIONS
Product Specification Revised 10/14
ZISB420DH
GE Monogram
®
42" Built-In Side-by-Side Refrigerator
A
B
C
D
E
1/4" Framed Panel
39 7/8"
9 1/2"
68 3/8"
14 9/16" 24 9/16"
F
G
17 13/16"
3 1/8"
DISPENSER CUTOUT
POSITION
Dispenser
Cutout
9 5/8"
(24.4)
15 3/8"
(39.1)
A
B
C
D
E
1/4" Backer Panel
39 7/8"
9 1/2"
68 3/8"
14 9/16" 24 9/16"
.10" Spacer Panel
39"
8 5/8"
67"
13 1/4"
23 1/4"
3/4" Overlay Panel
40 1/8"
9 3/4"
68 5/8" 14 13/16" 24 13/16"
F
G
17 15/16"
3 1/4"
.25" + .10" + .75" = 1.10" Total Panel Thickness
* DISPENSER CUTOUT
POSITION
* Cut the dispenser opening after the backer, spacer
and overlay panels have been assembled.
Dispenser
Cutout
9 5/8"
(24.4)
15 3/8"
(39.1)
