manualshive.com logo in svg

GE ZISB420DH, Manual, Page: 10 / 11

Share
Download
GE ZISB420DH Manual Download Page 10

STANDARD INSTALLATION

DISPENSER TRIM

RAISED OVERLAY PANEL DESIGN ON DISPENSER MODELS

1/4" PANEL DISPENSER TRIM

3/4" OVERLAY PANEL DISPENSER TRIM

Freezer Door

1/4" Framed Panel

Ice/Water Dispenser

1/4"

Total

Thickness

Freezer Door

1/4" Backer Panel

.10" Spacer Panel

3/4" Overlay Panel

Ice/Water Dispenser

1.10"

Total

Thickness

A

B

16 3/4"

10 5/8"

1/4" Backer Panel

 

3/4" Overlay Panel

.10" Spacer

1.10”

Total

Thickness

D

C

DISPENSER TRIM

SIDE VIEW CROSS SECTION

(Showing Raised Overlay  

with Middle Rail)

NOTES

These refrigerators are supplied with two 

dispenser trims, one for framed panels 

and one for overlay panels.

1/4" Panel Dispenser Trim: 
The framed panel must be 1/4” nominal 
thickness to fit the dispenser trim.

•  The dispenser trim fits over the custom 

panel and snaps into the freezer door.

•  If the panel is less than 0.250" thick, a 

noticeable gap may be created around 
the dispenser trim. Foam tape may be 
applied on the door to improve the fit.

•  If the panel is more than 0.250" thick,  

the dispenser trim cannot be secured  
to the door.

3/4" Overlay Panel Dispenser Trim: 
The 3/4” overlay dispenser trim is 
designed to fit a total panel thickness of 
1.100".

 •  If the panel is less than 1.100" thick, a 

noticeable gap may be created around 
the dispenser trim.

•  If the panel is more than 1.100" thick, 

the dispenser trim cannot be secured to 
the door.

•  The overlay panel must be constructed 

according to the specifications shown to 
achieve the correct total thickness.

•   Alternative panel construction methods 

such as securing a 3/4" panel to a 1/4" 
backer panel cannot be used. Another 
method, routing a 3/4"-thick panel 
on all sides, cannot be used. These 
methods will not result in the required 
1.100" panel thickness.

•  When a raised panel design is to be 

used, a custom middle rail is required.

Raised Overlay Panel Design on  

Dispenser Models: 
When a raised panel design is to be used, 
a custom wide middle rail is required to 
accept the dispenser trim.

•  The middle rail must be wide enough to 

allow for the dispenser trim to overlap 
the opening.

•  The middle rail must be 1.10” total 

thickness to accept the dispenser trim.

Product Specification Revised 10/14

ZISB420DH

GE Monogram

®

 42" Built-In Side-by-Side Refrigerator

Summary of Contents for ZISB420DH












Reviews:

No comments