GE XGS868, Programming Manual, Page: 42 / 133

Programming Site Data 1-35
November 2004
Setting Up the Frequency (cont.)
Note:
The measurement units that appear in these prompts are those
selected in the
Global-System
window earlier in this section.
3.
Enter a value for the low end of the frequency output range and
press
Next Item/Enter
.
Note:
A complete pulse consists of equal amounts of
ON
and
OFF
times. Choose a value that is compatible with the frequency
counter to be used.
4.
Enter a value for the high end of the frequency output range and
press
Next Item/Enter
.
5.
Enter a value between 1 and 10,000 for the frequency at full scale
and press
Next Item/Enter
.
Procedure Options
After completing the above steps, IDM returns to the
Input/Output
window. Do one of the following:
•
To continue programming, refer to Appendix A, Menu Maps
for IDM , to navigate to the desired menu.
•
To leave the User Program , press
Exit Page
three times.
Table 1-12: Output Measurement Options
Options
Flow Velocity
Volumetric Flow
Forward Totalized Volume Flow
Reverse Totalized Volume Flow
Total Flow Measurement Time
Mass Flow
Forward Totalized Mass Flow
Reverse Totalized Mass Flow
Diagnostic Parameters*