– 12 –
Clean Pump Filter
Due to the nature of the front-load washer, it is sometimes
possible for small articles to pass to the pump. The washer
has a filter to capture lost items so they are not dumped to
the drain. To retrieve lost items, clean out the pump filter.
1.
With a knife or slotted screwdriver, pry open the door on
the bottom right of the front of the unit.
2.
Twist the small white cap counterclockwise a quarter turn
and unhook the small rubber hose. Pull the hose out of the
hole and remove the white drain hose plug above a small
pan to capture any water that may drain. Drain the excess
water. Replace.
3.
Unscrew the pump filter. Rinse. Replace.
4.
Close the access door.
Pump Filter
Pump Filter
Drain Plug
Drain Hose
(Continued Next Page)