GE VR11, Reference Manual

Page: 5 / 118

internal connector of an RTM if a cable is attached and routed outside the
enclosure. It has to be done at the physical entry point as specified above.
Products manufactured by GE Intelligent Platforms should normally be suitable
for use in properly designed and produced customer equipment (system boxes
or operational systems) without any major redesign. However, the systems
might be subject to problems and issues once assembled, cabled and used. The
end user, system integrator or installer must test for possible problems and in
some cases show compliance to local regulations as required in his country or
by the intended application.
Waste Disposal
The mark or symbol on any electrical or electronic product shows that this
product may not be disposed off in a trash bin. Such goods have to be returned
to the original vendor or to a properly authorized collection point.
Electric waste disposal symbol with black bar as explained below
The black bar underneath the waste bin symbol shows that the product was
placed on the market after 13 August 2005. Alternatively the date of ‘placed on
the market’ is shown in place of the bar symbol.
CE conformance declaration
CE certification is required in EU countries for equipment which is used or
operated by the end user. Products sold or transferred between companies or
operated on company premises (factory floor, laboratory) do not need CE
certification.
CE certification can only be granted to complete and operational systems.
Boards or subsystems which cannot provide a useful function on their own do
not need CE certification.
GE Intelligent Platforms designs and tests all their products for EMI/EMC
conformance. Products manufactured by GE Intelligent Platforms should
normally be suitable for use in properly designed and produced customer
equipment (system boxes or operational systems) without any major redesign
GE Intelligent Platforms – VR11, VP11 Hardware Reference Manual, Second Edition Page 5