Starting the System
4.5 Probe/Program
Selection
This menu shows the connected probes.
The denomination of each transducer connected to the system appears in the corresponding touchkey
(soft key). Probe selection is done by touching the corresponding key. The key with the selected probe
is illuminated. At the same time the available applications of the selected probe are displayed in the
application field.
Upon selection of an Application, a maximum 7 User program fields appear in the “Settings” field,
and a default setting. The Default Setting is not rewriteable for the User.
Program selection is done by pressing the corresponding keys.
For each probe up to 7 programs can be stored.
The Setting enables speedy adjustment of the system for different fields of application.
To store a user setting under an application, review:
User Settings
(chapter 17.3.2)
of the Basic User
Manual for Voluson
®
730.
[
Probe
]
key (hard key):
This key activates and deactivates the "probe select" menu.
Behavior of probe select function, when connecting/disconnecting a probe,
review:
Transducer Connection
(chapter 4.4)
Probe selection menu on the touchpanel:
Probe window:
Shows all connected probes,
the active one is highlighted
(if one is active)
Application window:
Shows all applications for the
active probe. The last active
application is highlighted.
Setting (program) window:
Shows all settings for the active
application. The last active setting
is highlighted.
Selection of a probe:
Touch the corresponding probe key.
Each touch key shows the name of the responding probe. The selected probe is indicated when its key
is highlighted. At the same time the “Application” fields appear. Upon selection, the programmed
“Settings” come into view (8 setting keys for selection of the desired setting).
For starting the system review:
Starting the System
.
Voluson
®
730 - Instruction Manual
105838 Rev. 3
4-5
