GE VMIVME-7805 Hardware Reference Manual Download | Manualshive

Page: 70 / 81

background image

70 VMIVME-7805/VME-7805RC Hardware Reference Manual

C • Appendix C: OS and System Driver Software

The VMIVME-7805/VME-7805RC provide high-performance video and Local
Area Network (LAN) access by means of the video and LAN chipsets. The two
LAN adapters can be configured to allow the VMIVME-7805/VME-7805RC access
to two separate, physical networks. One LAN adapter is capable of running
10Base-T and 100Base-TX and the other is the GbE adapter (1000 Mbit/s).

To optimize performance of each of these PCI-based subsystems, install the driver
software located on the distribution CD-ROM provided with the unit. Detailed
instructions for installation of the drivers during the installation of Microsoft
Windows XP Professional and Windows 2000 operating systems are provided in
the following sections.

C.1 Driver Software Installation

In order to properly use the Video and LAN on the VMIVME-7805/VME-7805RC,
install the driver software located on the distribution CD-ROM provided with the
unit.

C.2 Windows 2000

C.2.1 Video Driver

1. Follow normal Windows 2000 installation procedures.

2. Double click 'My Computer' icon.

3. Double click on the Control Panel folder.

4. Double click the System icon.

5. Click on Hardware tab.

6. Click the Device Manager button.

7. Under Other Devices right click on Video Controller and select Uninstall.

8. Click OK and close the Device Manager.

9. Click OK to close system properties with changes.

10.Close all windows, and reboot your system.

11.After Windows reboots, the Found New Hardware wizard will appear. Click

Next.

12.Insert CD-ROM 385-000027-000.

13.Select “Search For A Suitable Driver For My Device” and click Next.

14.On the Locate Drivers Files, specify location by selecting Browse, browse to

your CD-ROM drive then to the Display folder and click Next.

15.Select OEMSETUP and click Open.

16.When the hardware wizard is displayed click OK (the path to OEMSET

should be displayed in the Copy Manufacturers Files From box).

17.The Driver Files Search Results dialog box will now display.

18.Click next and complete driver installation.

«
...
68
69
70
71
72
...
»

Summary of Contents for VMIVME-7805


















































































Reviews:

No comments

Related manuals for VMIVME-7805

Brand: AOpen Pages: 95

Brand: ON Semiconductor Pages: 20

Brand: Gigabyte Pages: 40

Brand: Gan Systems Pages: 28

Brand: ASROCK Pages: 83

Brand: Texas Instruments Pages: 19

Brand: Quick Pages: 48

Brand: MATSONIC Pages: 77

Brand: Gigabyte Pages: 96

TITAN TURBO PLUS ATX

Brand: TYAN Pages: 69

H470 AORUS PRO AX

Brand: Gigabyte Pages: 52

Brand: Intel Pages: 30

Brand: Gigabyte Pages: 96

Brand: Gigabyte Pages: 46

Brand: MSI Pages: 90

Brand: Aaeon Pages: 78

Brand: Zamel Pages: 3

Brand: Xilinx Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands