Secure Perfect 6.1.1 User Manual
226
Reader/Digital Output Tab
Manual Control Form
Manually lock or unlock doors and turn on or off DO (digital output) points, depending on the current
operator’s
facilities
and
permissions
.
Schedules override manual changes unless Indefinite Unlock has been selected. Micros will always
run schedules defined previously in its database. Therefore, if there was a schedule set to be in effect at
the current time, the manual change would be overridden and the schedule would be enforced.
Select micro
A micro must be selected before the system searches and displays results in the list box.
•
All displays all the digital outputs of the type selected in the field Select DO type, found on all micros.
•
By Micro displays all the digital outputs of the type selected in the field Select DO type, found on a
selected micro. Click the drop-down list to display a list of micros.
Select DO type
•
If you select Reader, the windowpane displays the DO points available for the readers.
•
If you select Other, the windowpane displays Aux DOs (the two 2 DO relays available on a 2RP
board) and other DO points. Example DO points include lights, sirens, and door strikes that may be
connected to the micro.
Columns in Windowpane
•
Description
: Description of the reader/DO in the database.
•
Micro
: Micro on which the reader/DO is located.
•
On Time
: Displays the On Time in the database. The On Time is the number of seconds this DO
remains in the active state when activated.
Set state to:
The names of the buttons change depending on the DO type (Reader or Other) selected.
If Reader is selected, click. . .
•
Duration Unlock
: To unlock the selected door for the time specified in the On Time column.
•
Lock
: To immediately lock the selected door.
•
Indefinite Unlock
: To unlock the selected door. It will remain unlocked until you manually lock it by
clicking lock.
•
Sched. Override
: To change the state of a door or DO, if you want a schedule to override its setting.
Example: Use Sched. Override to unlock a door if you want a schedule at a later time to lock this door.
If you don’t want the scheduler to lock your door, use the Indefinite Unlock selection.
If Other is selected, click. . .
•
On For Duration
: Activates the selected DO for the time specified in the On Time column.
•
Off
: Immediately deactivates the selected DO.
•
On Indefinite
: Activates the selected DO, which will remain active until you manually turn it off by
clicking Off.
•
Sched. Override
: Use this option to change the state of a DO if you want a schedule to override its
setting.
Purpose
Enter an explanation for locking/unlocking doors or activating/deactivating DO points. This field accepts
255 alphanumeric characters. These comments are written to the operator history file and display on the
Operator History Report
,
Purpose Field
.
