GE SpotChecker, Operating Manual

Page: 39 / 98

2.9 Software installation
The SpotChecker is completely con fi gurated and
ready for testing operation.
The software SpotChecker is installed as well as all
required drivers.
H
Note:
You will fi nd basic information on how to use the Win-
dows operating system in the documentation for Win-
dows and in the Windows Online Help (
Start – Help ).
Re-installation SpotChecker
The software has to be re-installed e.g. in the case of
a system failure. For re-installing you need the sup-
plied software CD.
H
Note:
Subsequent to the installation of the software you will
need a valid license
fi le to start the program.
Updates
If you install an update, don’t delete the old version. In-
stall the new version in the directory suggested by the
installation program. The old program version is auto-
matically deleted; the old database is maintained and
automatically copied into the correct directory.
Installation procedure
For a new installation or an update, please follow the
procedure outlined below. In each case you have to
connect the SpotChecker with an adequate external
USB CD drive.
– Switch the SpotChecker on. Windows will start.
– Insert the software CD into the CD drive. The in-
stallation program will start automatically.
Follow the instructions of the installation program.
During the program run, please observe the following:
❚
Enter your name and the name of your company in
the window
Registration .
Software installation
Initial start-up and basics
SpotChecker Issue 02, 03/2009
39