GE SIDE-BY-SIDE REFRIRATOR 22, Owner'S Manual & Installation Manual, Page: 22 / 48

22
49-60647-5
Care and Cleaning
Free er Compartment
1. Unplug the refrigerator.
2. Remove the shelf just above the light shield. (The
shelf will be easier to remove if it is emptied first.) On
some models, a screw at the top of the light shield
will need to be removed.
3. To remove the light shield, press in on the sides, and
lift up and out.
4. Replace the bulb with an appliance bulb of the same
or lower wattage, and reinstall the light shield. When
reinstalling the light shield, make sure the top tabs
snap securely into place. Replace the screw (on
some models).
5. Reinstall the shelf and plug the refrigerator back in.
Dispenser
(on some models)
1. Unplug the refrigerator.
2. The bulb is located on the dispenser under the
control panel. Remove the light bulb by turning it
counterclockwise.
wattage.
4. Plug the refrigerator back in.
Replacing the Light Bulbs (on some models)
Before replacing a burned-out light bulb, the refrigerator should be unplugged in order to avoid
contact with a live wire filament. (A burned-out light bulb may break when being replaced.)
Refrigerator Compartment—On models with LED lighting
the fresh food compartment and in the rear and side of
Appliances Service at 1.800.432.2737 in the United
States or 1.800.561.3344 in Canada.
Lighting
Lighting