GE SIDE-BY-SIDE REFRIRATOR 22, Owner'S Manual & Installation Manual, Page: 18 / 48

18
49-60647-5
Using the Dispenser
Select CUBED ice,
CRUSHED ice
or WATER .
Press the glass gently against
the top of the dispenser
cradle.
The spill shelf is not self-
draining. To reduce water
spotting, the shelf and its grille
should be cleaned regularly.
when the refrigerator is first
installed, there may be air in
the water line system. Press the dispenser arm for at
least two minutes to remove trapped air from the water
line and to fill the water system. To flush out impurities in
the water line, throw away the first six glassfuls of water.
Laceration Ha ard
the ice crushing blades and lead to serious injury or
amputation.
glass may break and result in personal injury.
Locking the Dispenser
Press the LOCK or LOCK CONTROLS
pad for 3 seconds to lock the dispenser
and control panel. To unlock, press and
hold the pad again for 3 seconds.
Before replacing a burned-out light
bulb, the refrigerator should be unplugged in order to
avoid contact with a live wire filament. (A burned-out light
bulb may break when being replaced.)
power to the light circuit.
Dispenser Light
This pad turns the light in the dispenser
on and off. The light also comes on
when the dispenser cradle is pressed.
out, it should be replaced with a 6 watt
Service.
Door Alarm
Use Door Alarm to sound if either door
is open for more than 3 minutes. The
alarm will stop once the door is closed.
screen.
Touch LED Dispenser Control
Press the SET FEATURES pad once and DOOR ALARM
will blink. Press ON/OFF and the door alarm will be set
and the icon will turn solid. Press ON/OFF again to turn
the alarm off.
Door Alarm
To set the alarm, press this pad until the indicator light
comes on. This alarm will sound if either door is open for
more than 3 minutes. The light goes out and the beeping
stops when you close the door.
Ice and Water Dispenser
(on some models.)
Quick Ice
When you need to speed up ice
production, use the Quick Ice feature.
While this feature is turned on, the
this period, ice production will increase up to 40 .
Models with the integrated ice feature system require
dispensed every 6 to 12 hours. This will help the ice
maker fill the bucket properly so that dispensing is better.
How to Use
Touch LED Dispenser Control
Press the SET FEATURES pad twice and QUICK ICE
will blink. Press ON/OFF to turn the feature on, then
again to turn it off.
Quick Ice
When you need ice in a hurry, press this pad to speed
up ice production. This will increase ice production for
the following 48 hours or until you press the pad again.
Spill Shelf