GE SENOGRAPHE 800T, Operator'S Manual

Page: 44 / 82

PREP
ARING
AN EXAMINA
TION
GE Medical Systems SENOGRAPHE 800T
REV 6 om 2135575–100
2–6
Select configurations and kV values.
When the Bucky is removed and the cassette holder is being used, the mAs values are
approximately divided by 2.
2–3–3 Examination of Chest Wall
Select configurations and kV values to suit thickness and density of region examined.
Note: Use of the Bucky is mandatory.
SECTION 3
PATIENT POSITIONING
Before beginning the mammogram, observe the following points:
Before positioning the patient, make a visual assessment of the breast area, and note
anything which may affect or be adversely affected by the correct positioning of the breast
for the mammogram, for example, warts, scarring, or skin which is not intact. In patients
with large breasts, perspiration under the breast can cause the skin to soften, and become
paper-thin.
To position the breast properly for a mammogram in the CC position, it is essential that
the breast is lifted away from the chest wall and gently pulled forward, in order to
visualize the maximum amount of breast tissue. Such pulling and lifting is necessary for
correct positioning, but can cause damaged skin to tear slightly, and may cause bleeding.
If any condition exists which may cause unusual discomfort or tearing of the skin, the
patient should be told of the importance of correct positioning, and should be warned in
advance of the possibility that minor tearing and /or slight bleeding might occur.
Use suitable techniques for the positioning of patients with breast implants.
GEMS can take no responsibility for injury to the patient caused by the use of heating or
warming devices external to the system.