GE RHM 04, Overwiew And Specifications

Page: 8 / 8

920-493A
© 2013 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product
names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE.
g
www.ge-mcs.com
Basic Order Code RHM 04
Sensor Size
Temperature Range
T1 NT from -20°C to +120°C (standard)
TA ET from -45°C to +120°C
T2 ET2 Extended Temperature Range from -45°C to +210°C
T3 ET1 Extended Temperature Range from -196°C to +50°C
T4 HT High Temperature Range from 0°C to +350°C
Pressure Range of Measuring Loops @ 120°C
P1 pmax = 150 bar, M0 Material (standard)
P2 pmax = 250 bar, M0 Material
PH pmax = 870 bar, HP Material
Construction Type (pmax indications @ 120°C)
PM0 Parallel Measuring Loops with removable Manifold and PTFE Seals,
pmax = 400 bar with thread connection, 214 bar with flange connection
SM0 Serial Measuring Loops with removable Manifold and PTFE Seals
pmax = 400 bar with thread connection, 214 bar with flange connection
PF0 Parallel Measuring Loops Seal Less Version
SF0 Serial Measuring Loops Seal Less Version, pmax = 42.9 bar
PFT Parallel Measuring Loops Seal Less Version for Thread Connection, pmax = 530 bar
PH0 Parallel Measuring Loops with High Pressure Manifold and PTFE Seals, pmax = 540 bar
PHH Parallel Measuring Loops with Very High Pressure Manifold and PTFE Seals,
pmax = 870 bar
Material of Wetted Parts
M0 Measuring Loops 1.4539 (904L), Manifold/Connection 1.4571 (316Ti) (standard)
M1 Measuring Loops and Manifold/Connection 1.4571 (316Ti)
M3 Measuring Loops and Connection Part 2.4602 (Alloy C22), Seal Less Construction
Types only
HP Measuring Loops HP 160; not with PF0, SF0, PFT Construction Type
Process Connection
D1 Flange DIN DN15/PN40 Form C
D2 Flange DIN DN15/PN100 Form E
A1 Flange ANSI ½” 150# RF/SF
A2 Flange ANSI ½” 300# RF/SF
A3 Flange ANSI ½’’ 600# RF/SF
R1 Flange ANSI ½’’ 1500# RTJ
A6 Flange ANSI ½” 1500# RF
G1 Female Thread G ¼”
N1 Female Thread ¼” NPT
W1 Swagelok ¼” tube inlet (SS-400-1-4W) - valid for SS only
S1 Sanitary ½” Triclamp, DIN 32676, pmax = 40 bar @ 120°C
S2 Sanitary NW10, DIN 11851, pmax = 40 bar @ 120°C
P2 Autoclave 3/8” MP (9/16-18 UNF female thread)
Others on request
RHM 04 - - - -