14
49-5000400 Rev. 2
Testing the Thermostat
Furnace Test
1.
Toggle mode button until furnace mode is active.
Furnace
mode screen is displayed.
2.
Adjust set temperature so it is 5 degrees above room
temperature. Within a few seconds, the furnace should initiate
its startup procedure.
3.
Adjust the set temperature so it is 2 degrees below the
room temperature and the heat should turn off.
Note:
Depending on the model of furnace used, there may be a
delay in engaging and disengaging the furnace.
Summary of Contents for RARMC Series
Page 16: ...16 49 5000400 Rev 2 ...
Page 34: ...16 49 5000400 Rev 2 ...
Page 52: ... 49 5000400 Rev 2 ...
