49-5000400 Rev. 2
13
Once the thermostat is installed, it should be tested for
functionality.
NOTE:
Before testing the thermostat, press the
Fan Auto/On
button until the display shows the
Auto
position.
Fan Test
1.
Toggle Mode button to Fan ON position.
2.
Fan turns on.
3.
Toggle between low and high fan speeds with the FAN
button.
4.
Speed should adjust accordingly
Cool Test
1.
Toggle
Mode
button until Cool mode is on.
Cool
mode
screen is displayed.
2.
Adjust set temperature so it is 5 degrees below room
temperature.
3.
Air conditioning should come on within a few seconds.
4.
Adjust the set temperature so it is 2 degrees above the
room temperature and the A/C should turn off.
Note:
There is a 3 minute time delay and a 3 minute minimum
run time for the compressor when it turns on/off.
Heat Pump Test (ARH models only)
1. Toggle
Mode
button until
Heat Pump
mode is on. Heat
Pump screen is displayed.
2. Adjust set temperature so it is 5 degrees above room
temperature.
3. Heating should come on within a few seconds.
4. Adjust the set temperature so it is 2 degrees below the
room temperature and the Heat Pump should turn off.
NOTE:
There is a 3 minute time delay and a 3 minute
minimum run time for the compressor when it turns on/off.
Testing the Thermostat
Summary of Contents for RARMC Series
Page 16: ...16 49 5000400 Rev 2 ...
Page 34: ...16 49 5000400 Rev 2 ...
Page 52: ... 49 5000400 Rev 2 ...
