GE QuickPanel Plus IC755CxS06RDx, User Manual

Page: 76 / 112

5.7 Connectors
5.7.1 Power Connector Pin-out for IC755CxS06RDx,
IC755CxW07CDx, and IC755CxSxxCDx
Refer to the section Connecting
Input Power .
Connector: Terminal Euro (Tyco Electronics 284539-3)
Mating Connector: (Tyco Electronics 284510-3)
Pin # Signal Name
Pin-out
1
+24 V dc †
1 3
2 GND
3 FG
† IC755CxSxxCDx supports both +12 V dc or +24 V dc IN
5.7.2 Ethernet for IC755CxS06RDx, IC755CxW07CDx,
and IC755CxSxxCDx
Refer to the section Ethernet
Port LED Operation .
The QuickPanel
+
display is equipped with 10Base-T/100-Base-TX Ethernet port(s).
Connect an Ethernet network cable (unshielded-twisted pair, CAT 5) to the unit through
the RJ-45 connector(s) on the bottom of the enclosure. LED indicators on the port
indicate channel status. The port can be accessed by Windows Embedded Compact 7
network communications or by your application.
5.7.2.1 Ethernet Port Details
Interface: Ethernet 10BASE-T/100BASE-TX
Pin #
Signal Name
Pin-out
1 TX+
8 1
Yellow Green
2 TX-
3 RX+
4 NC
5 NC
6 RX-
7 NC
8 NC
Note Dual Ethernet ports are separate ports (only applicable to QuickPanel +
IC755CxSxxCDx 10, 12, and 15" display units)
76 GFK-2847Q QuickPanel ⁺ Operator Interface User Manual
For public disclosure