GE QuickPanel Plus IC755CxS06RDx, User Manual

Page: 59 / 112

4.3.2 Initial Configuration
Perform the following procedure during initial startup.
➢ ➢
To configure the QuickPanel + display
1. Tap Start , point to Settings , then tap Control Panel .
2.
Configure the system clock.
From the
Date and Time
3. From the Control Panel, double-tap System to configure a Network Device Name.
Many applications, including Proficy Historian, require a unique Device Name.
Attention
It is recommended to set a unique Device Name
for the QuickPanel
+ to avoid future conflicts.
4. From the Control Panel, double-tap
Network and Dial-up Connections
to
configure network settings.
5.
Run the Backup Utility to save the settings.
4.4 Runtime Setup
To download an application to a QuickPanel + Operator Interface, set up a data link
between the unit and the development workstation. Refer to the section, Ethernet for
IC755CxS06RDx, IC755CxWxxCDx and IC755CxSxxCDx , and the PME online help,
Downloading a Machine Edition Project .
Pre-installation Checks GFK-2847Q 59
For public disclosure