background image

4

49-3000187  Rev. 2

SAFETY

 INFORMA

T

ION

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

 PROPER INSTALLATION

This washer must be properly installed and located in accordance with the Installation Instructions before it is used.

Ŷ

  Ensure that the hot water hose is connected to the “H” valve and the cold water hose is connected to the “C” 

valve.

Ŷ

  Install or store where it will not be exposed to temperatures below freezing or exposed to the weather, which 

could cause permanent damage and invalidate the warranty.

Ŷ

  Properly ground washer to conform with all governing codes and ordinances. Follow details in the Installation 

Instructions.

Ŷ

  Ensure washer is properly leveled and washer legs are adjusted such that unit is stable.

Ŷ

  Optional drain hose extension recommended for discharging heights from 60” - 96”.

Ŷ

  GE Appliances strongly recommends the use of factory specified parts. A list of factory hoses available for 

purchase are listed. These hoses are manufactured and tested to meet GE Appliances specifications.

Ŷ

  GE Appliances strongly recommends the use of new water supply hoses. Hoses degrade over time and need 

to be replaced every 5 years to reduce the risk of hose failures and water damage.

Ŷ

  

Consider recycling options for your appliance packaging material.

PARTS AND ACCESSORIES

Order on-line at 

GEApplianceparts.com

 today,  

24 hours a day or by phone at 800.626.2002 during 
normal business hours. In Canada, visit your local  
GE Appliances parts distributor or call 800.661.1616.

Part Number  Accessory

PM14X10002

  4 ft rubber water supply hoses

Or
PM14X10005

  4 ft braided water supply hoses

WH49X301

 

Drain hose extension

PM7X1

  

Washer Floor Tray - For models GTW720,  

 

 

GTW725, GTW840 and GTW845

PM7X2

  

Washer Floor Tray - For models PTW600  

   and 

PTW605

 START-UP SEQUENCE

Ŷ

  Any time the washer is being started or restarts after the washer lid has been opened and closed, the washer 

will turn on the cold water valve or drain pump for two short periods followed by a 10 second pause before 
continuing. If the lid is opened during this period, the washer will pause. You will have to push the 

Start

 button 

again to restart the cycle.

WHEN NOT IN USE

Ŷ

  Turn off water faucets to minimize leakage if a break or rupture should occur. Check the condition of the fill 

hoses; GE Appliances recommends changing the hoses every 5 years.

AUTOMATIC DRAIN SEQUENCE

Ŷ

  Machine will automatically drain any time the lid is left open for more than 15 minutes and water is present.

Ŷ

  Machine will automatically drain if left in a paused state with the lid closed for more than 24 hours and water is 

present.

Ŷ

  Machine will automatically drain after dispensing water in 

Water Station

 mode after the cycle knob has been 

turned to another cycle.

Summary of Contents for PTW605































Reviews: