11
Installation Instructions
Standard Installation Instructions
cont.
D
Attach the Lower Trim
Attach the lower trim (supplied
separately with the range) to the
bottom of the vertical side trim with
the 2 screws supplied.
D6
(Continued on following page)
Check For Proper Installation
of the Stop Screw
Look at both sides of the range under
the door. The stop screws must be
located in the notch on the sides of the
range, and not touch the top of the
notch when the range is fully seated
on the countertop. If the screws do not
meet the requirements, move the
screws to a position that meets these
requirements. (See illustration below.)
D5
Remove the Protective
Channels (if provided)
Carefully remove the protective
channels from the sides of the glass
cooktop. This may require a slight
lifting of the range to remove the
weight of the range from the protective
channels.
D4
Clear
Side
Trim
Shoulder
Screw
Notch in Bottom
of Side Trim
Remove Protective Cover From
Both Sides After Range Is In Cabinet
Protective Cover
Glass Cooktop
Top Flange
1/2
”
Wide
Lower
Left
Corner
Front
Frame
Attach
1 Screw
Each Side
Side
Trim
Lower
Trim
End Flange
& Tab On Lower
Trim Fits Inside
Side Trim
Summary of Contents for Profile JD968
Page 15: ...15 NOTES...
Page 16: ...16 NOTES 31 10622 1 1 07 JR...
