manualshive.com logo in svg

GE PM880, Operations & Installation Manual

Share
Download
GE PM880 Operations & Installation Manual Download Page 68

Creating and Managing Sites

4-7

August  2003

Saving a Site

You can save the current site in one of two ways:

•

From the Site Menu, you can scroll down to the Save Now 
option and press 

[ENTER]

, or

•

From within the Site Manager, press 

[MENU]

 to open the File 

Menu, scroll to the Save option, and press 

[ENTER]

.

In either case, the screen appears similar to Figure 4-7 below.

Figure 4-7:  The Save Current Site Window

•

Press 

[F2]

 (No) to cancel saving the site, or

•

Press 

[F3]

 (Yes) to save the site.

The PM880 remains in the current window (Operate Mode or Site 
Manager), with the current site saved.

         

   

No

Yes

Save the current site
(DEFAULT.SIT)?

         Save Site

Summary of Contents for PM880


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands