– 16 –
(
Continued next page
)
Using the surface units—Touch pad-controlled models.
Flashing Power Level in the Display
If a pan is removed or moved off-center
from the cooking ring during the cooking
process, the control will
fl
ash the current
selected power level. The
fl
ashing power
level indicates that the pan is no longer
detected. After 30 seconds, the element will
be deactivated and the display will turn off.
If the pan is returned to the surface element
within 30 seconds, the power level will stop
fl
ashing and cooking will resume.
Single Surface Unit
―
Cook Settings
To turn on a single surface unit:
Touch the
ON/OFF
pad, then touch the
(
+
)/(
–
) pad.
Use the (
+
)/(
–
) pad to choose the desired
power setting.
To use the Melt feature:
Touch the
ON/OFF
pad, then touch
MELT.
The element will automatically set to a
predetermined setting and “
L
” will be
displayed.
To turn off a single surface unit, touch the
ON/OFF
pad again.
The power level with a fraction indicates
the additional half-step setting. You
may hear clicking sounds indicating
the control is maintaining your desired
setting.
Surface Unit Cook Settings
T
he cooktop offers 19 power levels. Power
levels range from “
L
” to
H
in precise halfstep
increments. For example:
1
,
1-1/2
,
2
,
2-1/2
and up to
H
.
Power Level “
L
”, the lowest setting, is
recommended for “Keep Warm.”
The power level increases one-half level with
each touch.
1
2
To use the Simmer feature:
Touch the
ON/OFF
pad, then touch
SIMMER
.
The element will automatically set to a
predetermined setting and “
3
” will be
displayed. Adjust, using the (
+
)/(
–
) pad to
increase or decrease the simmer rate.
