49-1000702 Rev. 1
Installation Instructions
INSTALLATION INSTRUCTIONS
Reinstalling Bottom Hinge
8VHD)ODW+HDGVFUHZGULYHUWRXQVFUHZDQG
remove hinge pin from the bottom hinge, then
install it into the other screw hole on the bottom
hinge all the way in tightly. The plastic shim
should remain on the hinge pin during this
process.
8VHDPPVRFNHWZUHQFKWRLQVWDOOERWWRP
hinge onto the refrigerator with the 2 bottom hinge
screws tightly.
3. Insert the two tabs on the lower side of the Toe
.LFNLQWRWKHRSHQLQJVRQWKHORZHUIURQWRIWKH
UHIULJHUDWRUURWDWHWKHWRSRIWKH7RH.LFNLQWR
SRVLWLRQWKHQLQVWDOOWKH7RH.LFNVFUHZVZLWKD
Phillips Head screwdriver.
Reinstalling Freezer Door and
Middle Hinge (Cont.)
)OLSWKHIUHH]HUGRRUXSVLGHGRZQIDFLQJWKHUHDU
of the door, use a Phillips Head screwdriver to
UHPRYHWKHVFUHZVHFXULQJWKHULJKWVLGHIUHH]HU
door stopper, then remove the stopper and keep
LWIRUIXWXUHXVH,QVWDOOWKHOHIWVLGHIUHH]HUGRRU
stopper that came with the product onto the left
side with the same screw.
7XUQWKHIUHH]HUGRRUXSULJKW)DFLQJWKHUHDU
of the door, use a Phillips Head screwdriver to
remove the 1 screw securing door cap. Start from
the rear-left corner where the screw is removed,
push door cap forward while pulling it up to
disengage the left side clip, then do the same to
the right side to remove the door cap.
8VHD3HDGVFUHZGULYHUWRUHPRYHWKH
VFUHZVVHFXULQJIUHH]HUGRRUORFNWKHQUHPRYH
the door lock.
Reinstalling Freezer Door and
Middle Hinge
)OLSWKHGRRUORFNEUDFNHW8VHD3HDG
screwdriver to install the bracket onto the right
side of the mullion with the 3 door lock bracket
H[+HDGVFUHZVDQG)ODW+HDG
VFUHZ
REVERSING THE DOOR SWING (Cont.)
7RH.LFN
)ODW+HDG6FUHZ
Hex Head Screws
5LJKW6LGH)UHH]HU
'RRU6WRSSHU
/HIW6LGH)UHH]HU
'RRU6WRSSHU
'RRU&DS
)UHH]HU'RRU/RFN