14
PathSpeed CR User Manual
OI10026
The operator main screen is:
1
Set-up of image processing device:
• [blank]: Default image processing device selected.
• Off line: Transmission to all image processing devices disabled.
• [process.station] not ready: Image processing device not available.
• [process.station] rerouted: Images rerouted to other image processing
device.
2
Type of message
3
Extra comment or action to take
4
System status:
• READY: The PathSpeed CR SP1001 is ready for operation.
• BUSY: The PathSpeed CR SP1001 is treating an image plate.
• ERROR: An error has occurred. Refer to ‘Troubleshooting checklist’ on
• LOCKED: id.
• WARNING: id.
5
Operation mode:
• [blank]: Normal operation mode.
• EMERGENCY: Emergency function for image plates with ID data.
• EMERGENCY BUTTON: Emergency function for image plates without
ID data.
• ERASURE: Re-erasure function.
6
Error status: service code (SERVICE XXXXX) or error code (CODE XXXXX)
7
Device name of the PathSpeed CR SP1001
Identifier of image plate being treated:
8.1
8.2
8.3
After image ID data is read;
During scanning of image plate and transmittal of image data;
During transmittal of image data to image processing device.
READY
ADC SOLO
2301 A UM GB ADC Solo.book Page 14 Monday, May 15, 2000 12:12 PM
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
