20
PathSpeed CR User Manual
OI10026
Switching off the
PathSpeed CR SP1001
Before switching off
Check that the PathSpeed CR SP1001 is not scanning an image
plate. If the PathSpeed CR SP1001 is scanning an image plate,
the status indicator at the top of the machine is green and flash-
ing.
Switching off
It is recommended to switch off the PathSpeed CR SP1001 at
the end of the day.
Place the main switch in position ‘0’.
Only switch off the PathSpeed CR SP1001 if you do not intend to digitize
emergency image plates overnight. Switching on the PathSpeed CR SP1001
takes approximately 3 minutes. During this time emergency digitizing is not
possible!
2301 A UM GB ADC Solo.book Page 20 Monday, May 15, 2000 12:12 PM
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
